6 Listen to radio
Switch to radio mode
After the boot-up at the first time, the system
switches to radio mode automatically.
To switch the source back to radio afterwards,
tap
[Tuner] on the home menu.
» The interface for radio is displayed.
Set up
Before you search for radio stations, make prior
setup.
Tap
to display the setup menus.
Select a radio range
1
Tap [Local] to select a tuner sensitivity.
•
[Off]: Stations with strong and weak
signals can be tuned to.
[On]: Only stations with strong signals
•
can be tuned to.
EN
14
Enable the RDS feature
Note
•
RDS feature is enabled by default.
•
Only after the RDS feature is enabled, the option of
[PTY] is displayed.
Tap [RDS On] to enable the RDS feature.
» The option of [PTY] is displayed.
•
To disable the RDS feature, tap [RDS
Off].
Tune to a radio station
1
Tap FM or AM to select a band.
FM bands: FM1, FM2, FM3
•
AM bands: AM1, AM2
•
2
Tap and hold + or - until the frequency of
target radio station is displayed.
•
To tune to a radio station automatically,
tap + or -.
Tip
•
You can also press BAND on the remote control
repeatedly to select a band.
Store radio stations in memory
You can store up to 6 stations in each band.
Store radio stations manually
1
Select a band.
2
Tune to the target radio station.