Philips CED1500BT User Manual page 9

Note
•
When the parking brake of your vehicle is not engaged,
the video blocking system is activated. It blocks the
display of front video source only.
•
If the system is not properly connected with the
parking brake control module of your vehicle, video
signals will be blocked by the system, with the below
message displayed on the TFT.
Connectors and
sockets on rear
panel
1 For ISO male
connectors
2 REAR OUT R
(Red socket)
AV-IN R
3
(Red socket)
AV-IN L
4
(White socket)
5 REAR OUT L
(White socket)
VIDEO IN
6
(Yellow socket)
VIDEO OUT 1
7
(Yellow socket)
8 VIDEO OUT 2
(Yellow socket)
RADIO
9
ANTENNA
(Black connector)
External sockets or
connectors
As indicated above
Rear right speaker
Right audio channel
output socket of an
external player
Left audio channel
output socket of an
external player
Rear left speaker
Video output socket
of an external player
Video input socket
of an external
display device
Video input socket
of an external
display device
Radio antenna
10 CAMERA IN
(Purple socket)
11 SUB-W OUT
(Blue socket)
REVERSE
12
CAMERA
(Purple wire)
PARKING BRAKE
13
(Pink wire)
14 External Smart
Link Box (Black
connector)
OE SWC IR
15
REMOTE IN
(Brown wire)
OE SWC IR
16
REMOTE IN
(Black wire)
17 OE SWC AD
LEARN
(White wire)
18 OE SWC AD
LEARN
(White wire)
OE SWC AD
19
LEARN
(Black wire)
External Mic
20
(Black connector)
Tip
•
The pin arrangement for the ISO connectors depends
on the type of your vehicle. To avoid damage to the
system, connect properly.
Video output socket
of an external
camera
Sub-woofer
Reverse camera
(B+)
Parking brake (-)
An external device
compatible with the
application of Smart
Connect Link
OE SWC remote in
Ground
OE SWC AD Learn
line 1
OE SWC AD Learn
line 2
Ground
External microphone
EN
7