6 Listen to radio
Switch to radio mode
switches to radio mode automatically.
To switch the source back to radio afterwards,
[Tuner] on the home menu.
tap
» The interface for radio is displayed.
Set up
Before you search for radio stations, make prior
setup.
Tap
to display the setup menus.
Select a radio range
1
Tap [Local] to select a tuner sensitivity.
[Off]: Stations with strong and weak
signals can be tuned to.
[On]: Only stations with strong signals
can be tuned to.
EN
14
Enable the RDS feature
Note
RDS feature is enabled by default.
Only after the RDS feature is enabled, the option of
[PTY] is displayed.
Tap [RDS On] to enable the RDS feature.
» The option of [PTY] is displayed.
To disable the RDS feature, tap [RDS
Off].
Tune to a radio station
1
Tap FM or AM to select a band.
FM bands: FM1, FM2, FM3
AM bands: AM1, AM2
2
Tap and hold + or - until the frequency of
target radio station is displayed.
To tune to a radio station automatically,
tap + or -.
Tip
You can also press BAND on the remote control
repeatedly to select a band.
Store radio stations in memory
You can store up to 6 stations in each band.
Store radio stations manually
1
Select a band.
2
Tune to the target radio station.