Yamaha HTR-6150 Service Manual page 19

9. Press the "STOP" key of the DVD/CD player.
10. Press the "EJECT" key of the DVD/CD player to open the disc tray.
11. Remove the firmware CD from the disc tray and close the disc tray.
12. Turn off the power of the DVD/CD player and disconnect the power cable from the AC outlet.
13. Turn off the power by pressing the "MAIN ZONE ON/OFF" (RX-V563, HTR-6150) / "STANDBY/ON" (DSP-AX563)
key of this unit.
G Initializing of this unit
* After updating the firmware, be sure to initialize this unit.
1. Connect the power cable of this unit to the AC outlet.
2. Press the "MAIN ZONE ON/OFF" (RX-V563, HTR-6150) / "STANDBY/ON" (DSP-AX563) key while simultaneously
pressing the "STRAIGHT" and "AUDIO SELECT" keys. (Fig. 4)
The self-diagnostic function is activated.
"MAIN ZONE ON/OFF" key
(RX-V563, HTR-6150)
"STANDBY/ON" key
(DSP-AX563)
3. Select the main menu "R. FACTORY PRESET".
4. Select the "PRESET RSRV".
PRESET INHIBIT (Initialization inhibited)
R1.PRESET INHI
5. Turn off the power of this unit and disconnect the power cable from the AC outlet.
"STRAIGHT" key
Fig. 4
RX-V563/HTR-6150/DSP-AX563
"AUDIO SELECT" key
PRESET RESERVED (Initialization reserved)
R2.PRESET RSRV
19