Yamaha HTR-6150 Service Manual page 38

RX-V563/HTR-6150/DSP-AX563
M. HDMI SELECT
The audio signals input to HDMI IN are selected by the sub-menu and output.
HDMI SPDIF (SPDIF audio playback)
SPDIF signal is output.
HDMI NONE
No signal is output.
HDMI IN1
HDMI "IN 1" is output.
HDMI IN2
HDMI "IN 2" is output.
I2C : xx xxx (I2C access check)
Model ID for EDID setting (U, C, F models)
After replacement of DSP P.C.B or writing of the firmware, make sure to change the "M6 Model ID" setting to the same
model name as this unit (RX-V563 or HTR-6150).
Press "PRESET/TUNING<" or "PRESET TUNING>" key for selection.
38
M1.HDMI SPDIF
M2.HDMI MONE
M3.HDMI IN1
M4.HDMI IN2
M5.I2C:NG NYY
All Y = "OK"
Others = "NG"
M6.RX-V563
R, T, K, A, G, E, L models
M6.RX-V563
B model
M6.DSP-AX563
Check item Result
HDMI Rx OK
(IC12 DSP P.C.B.) NG
HDMI Tx OK
(IC11 DSP P.C.B.) NG
VIDEO ENCODER OK
(IC21 DSP P.C.B.) NG
M6.HTR-6150
Display

Y


N

Y


N

Y


N