Clock Setup; Password Change - LG LW76 Series Installation Manual

Forced Initialize
- If 'No' is selected, a command should be sent and received between the TV and a device for
proper initialization.
- If 'Yes' is selected, initialization is implemented when a device receives a command. If
initialization is not implemented, the TV remote control and local key will work.
HTNG Hotel Mode
- It is automatically set to 'Yes' if you want to set up the PowerOn Defautl / Max Volume / Min
Volume through the HTNG.
- Even in the case if Hotel Mode is 'No', it should work.

Clock Setup

Clock display
- You can select 'YES' or 'NO' by pressing
- After selecting 'YES', you can see the LED Clock TV.
dimming Standby
- Standby Dimming value Range : 0~15
dimming PowerOn
- PowerOn Dimming value Range: 0~99
Clock Source
- You can select 'Off', 'Pro:Centric', 'TV' by pressing
Forced Initialize
- If 'No' is selected, a command should be sent and received between the TV and a -device for
proper initialization.
- If Yes is selected, initialization is implemented when a device receives a command. If initialization
is not implemented, the TV remote control and local key will work.
Timezone(City) & Timezone(Offset)
- In the case when there is difference between the time information received from the Teletext and
the time of the current area, it can be set up to correct this. The initial value is 0, and it can be
changed in the range of -12Hrs ~ +12Hrs.

Password Change

- To ensure more security, Password can be changed by installers' own design.
1 Use the button to select the CHANGE and then press the OK button.
2 Enter four digit password.
3 Input the password again for confirmation.
INSTALLATION MENU
button.
button.
27