Clock Setup; Clock Source; Input; Programme/Frequency - LG T340C Z Series Installation Manual

Clock Setup

(Only LT34*H/LS34*H series)
* Image shown may differ from your TV.
1 Go to General -> Clock Setup.

Clock Source

• You can select Off, TV, Pro:Centric.

Input

• Select a specific source to receive time information from. When the Clock Source is set to TV, the available options are: ATV, DTV, RADIO, CATV,
CADTV, CA-Radio, and SDTV. When it is set to Pro:Centric, the available options are RF and IP. If RF is selected, you can set the Programme/
Frequency to receive time information. If IP is selected, the Programme/Frequency option is disabled. You can set the IP address and port number
to receive time information.

Programme/Frequency

• Select the programme number or frequency to get the time information when tuning on TV. If the current setting for clock source is 'DTV' , you can
get the clock information when selecting the decided source and programme. If the current setting for clock source is 'ATV' , you can get the clock
information of teletext at the number of programme. Set up the programme in accordance with the condition of the hotel clock source.

Time Zone

• The city corresponding to the state designated in the TV settings is set as default. You can change the selected city to Offset. If the selected city is
changed to Offset, you can change the time value from GMT+12 to GMT-11.
NOTE
• Options of Clock Display, Dimming Standby and Dimming PowerOn are only available for the models that support the external LED clock.
• For clock setup, select On for Clock Display only if the LED clock is connected to your TV. If you do not use the LED clock, select Off for Clock Display.
If you connect an external device, other than the LED clock, to the port for the LED clock connection on the TV, it may cause damage to the TV.
• If the current setting for clock source is Pro:Centric, City and Offset deactivates.
29