Glass Replacement - Monessen Hearth SS38 Installation And Operating Instructions Manual

Direct vent gas stove

Hide thumbs

Table Of Contents

Table of Contents

SS38 Direct Vent Gas Stove

Always use gloves when handling

broken glass.

1. Put on gloves. Remove door from hinges by lifting the

door up. Figure 48

2. Remove the 7/8" rope from around glass frame.

Figure 49

3. Using a 5/16" socket, remove hex nuts from glass retain-

ing brackets. Remove retaining brackets. Figure 49

4. Carefully remove broken glass.

5. Wrap new glass pane(s) with 3/4" gasket. Make sure

you have 1/4" overlap on each side.

6. Place new glass in frame. For three-piece glass style

frame, slide new glass into the 45° aluminum post (not

shown).

7. Fasten retaining brackets back into place with 5/16"

nuts.

8. Replace 7/8" rope. Make sure the joint is at the bottom

and there is no gap.

9. Slide door back down the hinges. Figure 48

Preformed

Glass

ST1117

Gasket

Figure 49 -

Replace Formed Glass

Retaining

Bracket

ST1117

Make sure the glass panel edges do not

touch any metal parts during thermal

expansion.

Hinges

Figure 48 -

Remove Door from Hinges

Retaining

Brackets

Hex Nuts

(not all shown)

Rope

Gasket

NOTE: Use only original MHSC

replacement parts.