1.65 / 3.3 kW Current consumption 14.35 A Input voltage 230 V / 50 Hz Amount of air 333.2 m Setting range 0-40 °C Dimensions 410 x 260 x 250 mm Weight 5.3 kg Operating Manual – Electrical Fan Heater TDS 20...
Intended use Safety Only use the device TDS 20 to heat enclosed spaces such as storage facilities, salesrooms, flats as well as Read this manual carefully before starting or to heat humid or wet surroundings, e.g. on building using the device. Store the manual near the device sites, whilst adhering to the technical data.
Regulation of the room thermostat Adjust the room temperature by turning the rotary switch of the room thermo- stat. When the set value is exceeded, the heating resistors switch off while the fan keeps run- ning. Operating Manual – Electrical Fan Heater TDS 20...
The air current is Air inlet is blocked. Clean air inlet and reduced. remove obstruction. relevant legal requirements. Fan motor is defec- Have it replaced. tive. Operating Manual – Electrical Fan Heater TDS 20...