• Do not use the device in potentially explosive rooms or areas and do not install it there. • Do not use the device in aggressive atmosphere. convector TCH 1 E...
Page 3
• Do not use the device in immediate proximity to curtains, reasonably foreseeable misuse. beds or sofas. • Do not make any unauthorised modifications, alterations or • Make sure that the air inlet and outlet are not obstructed. structural changes to the device. convector TCH 1 E...
Page 4
Observe the personnel qualifications! Warning The device is not a toy and does not belong in the hands of children. Warning Risk of suffocation! Do not leave the packaging lying around. Children may use it as a dangerous toy. convector TCH 1 E...
• with a cover to protect it from invasive dust, if necessary Transport handle • Place no further devices or objects on top of the device to Air inlet prevent it from being damaged. Rotary switch room thermostat Operating control lamp Foot convector TCH 1 E...
• Insert the mains plug into a properly secured mains power socket. • Make sure that the power cable is guided along the back of the device. Never guide the power cable along the front of the device! convector TCH 1 E...
• When the set value is exceeded, the heating switches off. device is not starting, have the electrics checked by a • When the set value is fallen below, the heating specialist company or by Trotec. automatically switches back on. Note...
Do not use any aggressive cleaning sides (C): 50 cm agents such as cleaning sprays, solvents, alcohol-based or front (D): 50 cm abrasive cleaners to dampen the cloth. Wipe the housing dry after cleaning. Weight 1 kg convector TCH 1 E...
Page 9
Room temperature control, with presence detection Room temperature control, with open window detection With distance control option With adaptive start control With working time limitation With black bulb sensor Contact details Trotec GmbH Grebbener Straße 7 D-52525 Heinsberg NA: not applicable convector TCH 1 E...