Blower And Other Optional Equipment - Monessen Hearth Vent-Free Fireplace Systems DBX24C* Installation And Operating Instructions Manual

BLOWER AND OTHER OPTIONAL EQUIPMENT

OPTIONAL EQUIPMENT
FORCED AIR KIT
If you are installing the forced air kit (Models BLO24-T, BLO24-TB or BLOT), see the installation instructions provided
with the kit for electrical wiring requirements or the blower installation section.
Model DFX24C uses blower model BLO24T.
Model DFX32C uses blower model BLOT.
Model DBX24C uses blower model BLO24TB.
The firebox must be connected to main power supply at time of firebox installation. The blower must be installed prior to
the installation of the unvented heater. The electrical connections must be made before the firebox is framed and enclosed
in the finished walls.
BRASS LOUVERS
Optional brass louvers may be installed in place of the factory installed black louvers. See installation instructions provided
with the brass louvers.
FIREBRICKS
Optional firebrick kits can be installed. See installation instructions provided with kit or see page 11.
34
Electrical connections should only be performed by a
qualifi ed, licensed electrician, main power must be off
when connecting to main electrical power supply or
performing service.
33D4047