Table of Contents
Advertisement
OPTIONAL EQUIPMENT
FORCED AIR KIT (BLOT)
If you are installing the forced air kit, Model BLO, on GCUF32B, GCUF36B or GCUF42B models, see the installation
instructions provided with the kit for electrical wiring requirements, or the blower installation section. The firebox
must be connected to main power supply at time of firebox installation. The blower must be installed prior to the
installation of the vent-free heater. The electrical connections must be made before the firebox is framed and enclosed
in the finished walls.
BRASS OR CHROME LOUVERS AND FILIGREE
Optional brass or chrome louver kits may be installed in place of the factory installed black louvers. Refer to installation
instructions provided with the brass or chrome louvers.
BRASS OR CHROME TRIM
Optional brass trim kits can be used with unit when installed as a free standing fireplace with wood surround.
FIREBRICK
Optional firebrick kits can be installed. See installation instructions provided with kit.
OPTIONAL WIDE CANOPY
The optional wide canopy can be installed. See installation instructions provided with kit.
Electrical connections should only be performed by a qualified, licensed electrician,
main power must be off when connecting to main electrical power supply or
performing service.
The blower when installed, must be electrically grounded in accordance with
local codes or in the absence of local codes, with the National Electrical Code
ANSI/NFPA 70.
14
26D3312
Hide quick links:
Advertisement
Table of Contents
