Operating Instructions; For Your Safety Read Before Lighting - Monessen Hearth Vent-Free Fireplace Systems DBX24C* Installation And Operating Instructions Manual

Monessen hearth vent-free fireplace systems installation and operating instructions
Table of Contents

Advertisement

A. This appliance is equipped with a piezo ignition device which automatically lights the pilot. If piezo is not
working properly see
B. BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the floor because
some gas is heavier than air and will settle on the floor.
WHAT TO DO IF YOU SMELL GAS:
Do not attempt to light any appliance.
Do not touch any electric switch; do not use any phone in your building.
Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.
If you cannot reach your gas supplier, call the fire department.
C. Use only your hand to push in, or turn the gas control knob. Never use tools. If the knob will not push in or
turn by hand, don't try to repair it. Call a qualified service technician. Force or attempted repair may result in
a fire or explosion.
D. Do not use this appliance if any part of it has been under water. Immediately call a qualified service technician
to inspect the appliance and to replace any part of the control system and any gas control that has been under
water.
Control Knob
33D4047

FOR YOUR SAFETY READ BEFORE LIGHTING

If you do not follow these instruction
exactly, a fi re or explosion may result
causing property damage, personal
injury or loss of life.
Match Lighting Instructions, page 33.
Piezo
Ignitor
Figure 44 - Location of Piezo Ignitor & Control Knob

OPERATING INSTRUCTIONS

29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents