GENERAL INSTALLATION INFORMATION
REMOVING SCREEN
1. Remove bottom louver. See Figure 14.
2. Removing fireplace screen frame panel by pushing screen frame panel up and out. See Figure 14.
Do not operate the unit without the
screen frame panel and canopy
installed.
NOTE: Fireplace screen must be removed to access log box and to install canopy.
INSTALLING CANOPY
1. Push louvers up and out to remove top louver assembly.
2. Align the black canopy with the holes in the top frame assembly. See Figure 15.
3. Install the three (3) screws (in owner's manual packaging) which attach the canopy to the top frame assembly. See
Figure 15.
4. Tighten all screws. Make sure the canopy is level and secure. Install top louver assembly.
14
Fireplace
Screen
Louver
Figure 14 - Removing Fireplace Screen Frame Panel
Figure 15 - Canopy Installation
Canopy
Screws
Canopy
33D4047