Toyota Touch & Go Owner's Manual page 30

Touch_Go_Plus_OM20B71E.book Page 25 Thursday, September 20, 2012 12:03 PM
CURRENT LOCATION AND GPS IN-
FORMATION
Current location, geo-coordinates and
GPS information are displayed.
1
Touch "Options" on the map.
2
Touch "Location & GPS informa-
tion".
3
An information screen will be dis-
played.
On this screen, the following information is
displayed.
No.
The information provided varies,
depending whether the road cur-
rently being travelled on is a mo-
torway or a street.
Latitude and Longitude
Amount of available satellites
and the altitude.
Display audio_Ext_EE
Information
1. NAVIGATION OPERATION
SCREEN SCROLL OPERATION
When any point on the map is touched,
that point moves to the centre of the
screen and is shown by the cursor
mark .
If a finger is continuously held on the
screen, the map will continue scrolling in
that direction until the finger is removed.
A street name or geo-coordinates of the
touched point will be shown, depending
on the scale of the map.
After the screen is scrolled, the map
remains centred at the selected location
until another function is activated. The cur-
rent vehicle position mark will continue to
move along your actual route and may
move off the screen. When
touched, the current vehicle position mark
returns to the centre of the screen and the
map moves as the vehicle proceeds along
the designated route.
When the scroll feature is used, the cur-
rent vehicle position mark may disappear
from the screen. Touch
the current vehicle position on the map
screen.
When "Go" is touched, the starting
route guidance screen is displayed.
(See page 43.)
When "Save" is touched, the point is
registered in the "Stored" list on the "My
destinations" screen. (See page 57.)
2
is
to display
25