Navigation Operation; Quick Reference - Toyota Touch & Go Owner's Manual

Touch_Go_Plus_OM20B71E.book Page 20 Thursday, September 20, 2012 12:03 PM

1. NAVIGATION OPERATION

1. QUICK REFERENCE

To display the "Navigation" menu screen, touch "NAV" on the map or press the
"MAP NAV" button. When "NAV" is touched or the "MAP NAV" button is pressed,
the screen that was last displayed is returned to. Touch
igation" menu screen. From this screen, destinations can be entered and route-re-
lated settings can be changed.
"Navigation" menu screen
No.
Touch to display the "My destinations" screen.
A destination can be entered by selecting an item from the list of stored
destinations, last destinations or the addresses from the connected
phone's phone book.
Touch to display the "Enter destination" screen.
A destination can be entered by address, POI or using advanced op-
tions. It can also be added as a stopover to a destination.
Touch to display the "Traffic messages" screen.
It contains a list of traffic messages relating to the set route, all traffic
messages and warnings.
Touch to display the "Route options" screen.
The route preferences and avoidance criteria can be adjusted.
Touch the corresponding icon to change to the "My destinations", "En-
ter destination", "Traffic messages" or "Route options" screen.
20
Display audio_Ext_EE
Function
to display the "Nav-
Page
35
37, 50
32
69
32, 35, 37,
50, 69