Nonslip footwear is recommended. Wear protective PROXXON does not accept responsibility for the safe hair covering to contain long hair. functioning of the machine Exception: The reference to gloves may be omitted from the instructions for a grinder.
REPLACEMENT PARTS. • Only use accessories and spare parts recommended 23. TO REDUCE THE RISK OF ELECTRIC SHOCK, by PROXXON. THIS EQUIPMENT HAS A POLARIZED PLUG. • Observe the max. permitted rotational speed. (One blade is wider than the other). This plug will fit •...
Page 5
Description of the machine Fitting and changing the milling cutter: The MT 300 table milling machine is ideal for shaping, Note! grooving, chamfering, edging and taking out. With the milling cutter running at 30,000 rpm, clean and precise When carrying out any of the work described below, it is results with rapid waste removal are guaranteed.
Cutting too deeply and too high a feed rate Repair service is available at your PROXXON service lead to poor results and load the mechanism center unnecessarily.