Table of Contents
Advertisement
Front Panel Controls
* AUTO Function
When you press AUTO/SET button
before using OSD menu, the screen
disappears momentarily. Then, it is
adjusted automaticaly to optimized
configuration.
P R O C E S S I N G
A U T O C O N F I G U R A T I O N
If screen configuration needs to be
adjusted, you can use H/V Position,
Clock, Phase function from OSD
menu for better screen quality
(see A9 to A11).
Control Panel Function
OSD Button
Use this button to enter
or exit the on screen
display.
Buttons
Use these buttons to
choose or adjust items
in the on screen display.
A8
Power Indicator
The power indicator light is shown in the
power button. This indicator lights up
green when the monitor operates
normally. If the monitor is in DPM (Energy
Saving) mode (stand-by/ suspend/power
off), this indicator color changes to amber.
AUTO/SET Button*
Power Button
Use this button to enter
Use this button to turn
a selection in the on
the monitor on or off.
screen display.
Operation
Advertisement
Table of Contents
