Introduction The Monitor has an active matrix TFT (Thin-Film Transistor) LCD (Liquid Crystal Display). This monitor is designed for use in small working areas or for those who need more working space on the desk. Features The Monitor is a 15inch (15 inches viewable) intelligent micropro-cessor based monitor.
Connecting the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow these steps: Place the monitor in a convenient, well-ventilated location near your computer. Power off both the monitor and Computer. Slightly press and pull the latch on Stand cover.
Connecting the Monitor Connection the Audio Connect headphones Connect microphone Connect to the *LINE OUT jack of the PC sound card. Connect to the microphone jack of the PC sound card. If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out using the card jumper or the program.
Location and Function of Controls Front View MUTE MENU AUTO Power Button MUTE Button Power Indicator AUTO/SET Button MENU Button Buttons VESA wall mounting Connected to another object (stand type and Rear View wall-mounted type - optional) DC Power Connecter D-Sub Signal Connector Kensington Security Slot Connected to a locking...
Control Panel Function Front Panel Controls Buttons MUTE Button Power Button AUTO MUTE MENU Power (DPMS) Indicator MENU Button AUTO/SET Button Control Function MUTE MUTE Button Use this button to turn the audio on or off. Use this button to enter and from the on MENU MENU Button screen display (OSD).
On Screen Display (OSD) Control Adjustment Making adjustments to the image size, position and operating parameters of the monitor are quick and easy with the On Screen Display Control system. A quick example is given below to familiarize you with the use of the controls. Following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selection and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the items that are shown on the Menu. OSD Adjust Description BRIGHTNESS CONTRAST...
On Screen Display(OSD) Selection and Adjustment OSD Adjust Description CLOCK To minimize any vertical bars or TRACKING stripes visible on the screen background.The horizontal screen CLOCK size will also change. PHASE To adjust the focus of the display. PHASE This item allows you to remove any horizontal noise and clear or sharpen the image of characters.
Video Memory Modes The monitor has 30 memory locations for display modes, 14 of which are factory preset to popular video modes. Display Modes (Resolution) Display Modes (Resolution) Horizontal Freq.(kHz) Vertical Freq.(Hz) 31.47 640 x 350 31.47 720 x 400 31.47 640 x 480 35.00...
Troubleshooting Check the following before calling for service. Display Position is incorrect. Push the AUTO/SET Button. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. On the screen background, vertical bars or stripes are visible. Push the AUTO/SET Button.