Control Panel Function - LG FLATRON LCD 680LE User Manual

Control Panel Function

Front Panel Controls
Control
OSD Button
100
AUTO/SET Button
P R O C E S S I N G
A U T O C O N F I G U R A T I O N
Power Button
Power Indicator
AUTO/SET Button
OSD Button
Button
Use this button to enter or exit the on screen display.
Use these buttons to choose or adjust items in the on
Button
screen display.
<Shortcut Keys>
• Brightness and Contrast can be adjusted directly
without entering the On Screen Display (OSD) system.
Touch the
100
then the OSD button to save all changes. The
Brightness and Contrast functions are also available in
the On Screen Display (OSD) menu.
Use this button to enter a selection in the on screen
display.
* AUTO adjustment function
Touch the AUTO/SET button before using OSD menu.
This button is for the automatic adjustment of the screen
position, clock and phase.
Note: Some signal from some graphics boards may not function
properly. If the results are unsatisfactory, adjust your monitor's
Position, Clock and Phase manually.
Use this button to turn the monitor on or off.
The power indicator light is shown in the power button.
This indicator lights up green when the monitor
operates normally. If the monitor is in DPM (Energy
Saving) mode (stand-by/ suspend/power off), this
indicator color changes to amber.
A4
Power Button
Power Indicator
Function
buttons to adjust the settings and