Motorola v3i Disassembly Manual page 10

Ajay16 Motorola v3i Disassembly Guide v1.0
Page: 10
19. Turn the phone over so the other flipper is facing you and place a
screwdriver on the small brass part, and push hard, push it in as
far as you can so that the small brass part pops out of the keypad
hinge.
You can then lift it out.
SIDE, DON'T SEVERE IT!
from the left hinge.
20. From the outside push out the flicker using a screwdriver. Then
pull it out from the other side. Make sure you remove the flipper
and its black housing. Put this into the new housing.
Compiled Exclusively for MotoModders.net
WATCH THE RIBBON ON THE OPPOSITE
Unhook the ribbon as soon as you can