Motorola v3i Disassembly Manual page 19

Ajay16 Motorola v3i Disassembly Guide v1.0
Page: 19
38. Now pull the left hand side of the sim card holder down at an
angle so it unclips.
39. Now unfree the sim card holder from the left hand side, it should
simply slide out once unclipped.
40. Place the sim card holder into the new housing, the bottom goes
in first, you might have to bend it slightly to get it in, just bend it
back to flat once finished. Place the small rubber bung in the new
housing.
Compiled Exclusively for MotoModders.net