FOR-A FA-AUX30 Operation Manual page 5

Upon Receipt
Unpacking
FA-AUX30 units and their accessories are fully inspected and adjusted prior to shipment.
Operation can be performed immediately upon completing all required connections and
operational settings.
Check your received items against the packing lists below. Check to ensure no damage has
occurred during shipment. If damage has occurred, or items are missing, inform your supplier
immediately.
ITEM
FA-AUX30
Rack Mount Brackets
Control Cable
CD-ROM
Button Labels
Pry tool
Attaching Button Labels
Use the supplied pry tool and button label.

Removing button switches
(1) Slide the pry tool into the opening between a button
and front panel casing (with the lip of the tool facing
the button).
Slide the pry tool to the right or left of a button, not above or below, to prevent damage
to the unit.
(2) Wedge the lip of the pry tool under the button.
(3) Pry the button out.
(4) Completely remove the button.
QTY
1
1 set EIA standard type
3 sets For FA-10GPI or FA-10RU connection (1m)
1 FA-AUX30 Operation Manual (PDF)
1 set
1 For button cap removal
IMPORTANT
5
REMARKS
Pry lever