Table of Contents
Advertisement
Problem
Operation of rekordbox dj becomes
unstable.
The fader start function does not work.
After jog dial rotation stops, the track play-
back position may advance in the rotation
direction for a while.
The jog illumination does not rotate dur-
ing playback. or it rotates but it does not
synchronize with the platter display of
rekordbox dj. The [TEMPO] slider does not
work if the deck is switched. (TAKEOVER
indicator lights.)
Only one track deck is display on the screen.
The platter is not displayed on the track
deck.
There is not change even if a perfor-
mance pad is pressed while pressing the
[CAPTURE] button.
There is no change even if the [CAPTURE]
button is pressed while pressing the [SHIFT]
button.
The sampler deck's sound cannot be moni-
tored with headphones.
The playback position does not move even if
the [NEEDLE SEARCH] pad is touched.
Hissing sound is output from the master
output when a track is not played back.
Audio Block Diagram
CH3
CD
MIC1
CH1
LINE
CH2
LINE
CH4
CD
MIC2
USB
PC
30
En
Check
Are you using softwares other than rekordbox at the same
time?
When other USB devices are connected to the computer.
Are you using a USB hub?
There is a problem with the USB port to which this unit is
connected.
Is this unit connected to a notebook computer running on
its battery?
The USB buffer size is too small.
Is a cue set?
Is the crossfader assign switch for the channel that you
wish to start outputting from set to [A] or [B] ? (For cross-
fader start)
Is the back spin length of the utilities mode set to standard
or long?
In the utilities mode, is the unit set to be forcefully oper-
ated as a general MIDI controller?
Is rekordbox set to the [EXPORT] mode?
Has rekordbox dj been activated?
Is any loop active?
Is the sampler slot that has been already loaded selected?
Is the slicer or slicer loop mode set?
Is the sampler slot that has been already loaded selected?
Is [SAMPLER CUE] selected?
Is the [SAMPLER VOLUME] fader position set to the near
side?
Is [Needle Lock] of rekordbox dj enabled?
Is [NOISE] of SOUND COLOR FX on?
MIDI
OUT
SOUND
3Band
COLOR
Trim
EQ
FX
SOUND
3Band
COLOR
PHONO
Trim
EQ
FX
SOUND
3Band
COLOR
PHONO
Trim
EQ
FX
SOUND
3Band
COLOR
Trim
EQ
FX
Remedy
Quit other applications to decrease the load on the computer.
If operation continues to be unstable, try disabling the wireless network or other wireless
connections, antivirus software, the screen saver, the low power mode, etc.
( 5 Page)
Disconnect other USB devices from the computer.
When another USB audio device is connected to the computer at the same time, it may not
operate or be recognized normally.
USB hubs cannot be used. Connect the computer and this unit directly using the included
USB cable.
If your computer has multiple USB ports, try connecting this unit to a different USB port.
Supply power to the notebook computer from an AC power supply.
(Depending on the notebook computer's settings, the low power mode may be set when the
computer is running on its battery, automatically reducing the performance of the computer
itself.) ( 5 Page)
Raise the USB buffer size. (page 6 )
Set the cue.
Set the crossfader assign switch for the channel that you wish to start outputting from to [A]
or [B].
Set the back spin length of the utilities mode to short. When the jog dial rotation stops,
playback pauses or becomes normal playback at the position.
In the utilities mode, set the mode with which the operation of the unit is automatically
switched according to whether or not rekordbox is running.
Click the area indicated by [EXPORT] at the upper left of the screen, and then select
[PERFORMANCE].
Enter the rekordbox dj license key included with this unit on the [Preferences] > [License]
screen of rekordbox. For details on the activation, see the rekordbox software's manual.
Set a loop using the [AUTO BEAT LOOP] button/[LOOP IN]/[LOOP OUT] buttons.
Clear the sampler slot by clicking the [EJECT] button on the sampler panel of rekordbox dj, or
select the [SAMPLER] tab on the [Preferences] > [CONTROLLER] screen of rekordbox and
unlock [Eject/Load Lock].
Press the [SLICER] mode button to set the slicer mode, or press the [SHIFT] and [SLICER]
mode buttons to set the slicer loop mode.
Clear the sampler slot by clicking the [EJECT] button on the sampler panel of rekordbox dj, or
select the [SAMPLER] tab on the [Preferences] > [CONTROLLER] screen of rekordbox and
unlock [Eject/Load Lock].
Press the [SAMPLER CUE] button to turn on the monitor of the sampler deck.
Set the [SAMPLER VOLUME] fader to the appropriate position.
Unlock [Needle Lock] in the [DECK] tab on the [Preferences] > [CONTROLLER] screen of
rekordbox.
If [Needle Lock] is locked, the playback position can be moved using the [NEEDLE SEARCH]
pad when track playback is paused or while touching the jog.
If the [NOISE] button of SOUND COLOR FX is blinking, press the [NOISE] button. Set the
[COLOR] control to the center position.
PC
CH
LEVEL
METER
CROSS FADER
ASSIGN
CH3
CH
CH1
CUE
FADER
CD
CUE
CH1
CH
CH
CUE
FADER
FADER
CH2
CH
CUE
FADER
CH4
CH
CUE
FADER
CD
LEVEL
CROSS
FADER
CURVE
CROSS
LEVEL
FADER
MASTER CUE
CH3 CUE
CH1 CUE
MIX LEVEL
CH2 CUE
CH4 CUE
BOOTH OUT
MASTER
LEVEL
METER
MASTER
OUT1(XLR)
MASTER
OUT2(RCA)
HEADPHONES
(Ø 6.3 mm)
HEADPHONES
(Ø 3.5 mm)
Hide quick links:
Advertisement
Table of Contents
