JVC CH-X1500 Service Manual page 17

2.5.4 Mounting top plate (See fig.41~44)
(1) Mount the upper rod on the lifter side and set it on the rear
of the top plate, then mount the other end of the upper rod
to k .
(2) Check that the five points l, m, n, o and p are correctly
positioned.
When mounting section p, set it so that the bending sec-
tion of the top plate pinches section q of the lifter unit.
(3) Attach the top plate with six screws J.
Elevator spring
Remove this part first
Proper orientation
Fig.41
l m n
k
Upper rod
J
Top plate
J
Lifter unit
p o
Fig.44
Fig.42
Rod
Fig.43
q
o section
CH-X1500
J
1-17