JVC CH-X1500 Service Manual page 13

2.4.11 Removing the tray motor assembly (See fig.27, 28)
(1) Remove the two screws R attaching the tray motor as-
sembly, and remove.
(2) Remove the two screws S attaching the tray motor, and
remove the tray motor assembly from the tray motor hold-
er.
2.4.12 Separation of the chassis (L) assembly and chassis (R) assembly (See fig.29)
(1) Remove the two screws T retaining the chassis (L) and
(R) assemblies.
(2) Slide the chassis (L) assembly toward the front and detach
it, then remove the chassis (L) upward.
R
Tray motor assembly
Fig.27
Tray motor
Fig.28
T
T
Front side
Fig.29
CH-X1500
R
Tray motor holder
S
Chassis(L) assembly
Chassis(R) assembly
1-13