JVC CH-X1500 Service Manual page 16

CH-X1500
2.5.3 Mounting the chassis (L) assembly and chassis (R)
assembly (See fig.38~40)
(1) Attach the lower rod to the chassis (R) assembly. While
shifting the rod toward the front side, mount the rod on the
lifter unit.
With the rod mounted, place the lifter unit on the chassis
(R) assembly.
(2) Combine the chassis (L) and (R) assemblies so that the
hook section i of the chassis (L) assembly is inserted into
the notch of the chassis (R) assembly by sliding it from the
front side, and then the two lib j jointed to the chassis (L)
assembly.
(3) After reassembled, fix with the screw T.
(4) Attach the elevator spring between the lifter unit and the
chassis.
1-16
Lifter unit
Chassis(R) assembly
Fig.38
Chassis(L) assembly
i
Chassis(R) assembly
Fig.39
T
j
Chassis(R) assembly
Fig.40
Lower rod
Attached
Chassis(L) assembly
T
j