Controls And Displays; Front Panel - Pioneer HTP-072 Operating Instructions Manual

01

Controls and displays

01
Chapter 1:
Controls and displays

Front panel

1 2
SPEAKERS DIMMER
INPUT
SELECTOR
STANDBY/ON
PHONES
9 10
1 INPUT SELECTOR dial
Selects an input source (page 20).
2 Receiver control buttons
SPEAKERS – Use to change the speaker system on or off.
When the SP OFF is selected, no sound is output from the
speakers connected to this receiver.
DIMMER – Dims or brightens the display. The brightness
can be controlled in four steps.
DISPLAY – Switches the display of this unit. The listening
mode, sound volume, input name can be checked by
selecting an input source.
3 Character display
See Display on page 7.
4 Tuner control buttons
BAND – Switches between AM, FM ST (stereo) and FM
MONO radio bands (page 24).
6
En
3 4 5 6 7
HDMI iPod iPhone
DISPLAY BAND TUNER EDIT TUNE PRESET ENTER
AUTO SURROUND/ ALC/ ADVANCED iPod iPhone
STREAM DIRECT STANDARD SURR SURROUND ECO DIRECT CONTROL
11 12 13
TUNER EDIT – Use with TUNE /, PRESET / and
ENTER to memorize and name stations for recall
(page 23).
TUNE / – Used to find radio frequencies (page 23).
PRESET / – Use to select preset radio stations
(page 24).
5 Remote sensor
Receives the signals from the remote control (see Operating
range of remote control on page 9).
6 HDMI indicator
Blinks when connecting an HDMI-equipped component;
lights when the component is connected (page 14).
7 iPod iPhone indicator
Lights when an iPod/iPhone is connected and iPod/USB
input is selected (page 21).
8
VSX-324
AV RECEIVER
15 16
MASTER
VOLUME
5V 1A
21 22
14
8 MASTER VOLUME dial
9  STANDBY/ON
10 PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers. The
listening mode when the sound is heard from the headphone
can be selected only from PHONES SURR, STEREO or
STEREO ALC mode.
11 Listening mode buttons
AUTO SURROUND/STREAM DIRECT – Switches
between Auto surround mode (page 26) and Stream
Direct playback (page 27).
ALC/STANDARD SURR – Press for standard decoding
and to switch between the modes of 2 Pro Logic and
NEO:6, and the Auto level control stereo mode (page 26).
ADVANCED SURROUND – Switches between the
various surround modes (page 26).
17 18 19 17 20
23 24 25 25 26