Roll Paper Cannot Be Inserted Into The Paper Feed Slot; Cannot Load Sheets; Paper Is Not Cut Neatly - Canon iPF685 Series Basic Manual

Roll paper cannot be inserted into the paper feed slot

7
Holding it at the positions indicated, close the Roll
Cover.
8
Pull the Release Lever forward.
Roll paper cannot be inserted into the paper feed slot
Roll paper cannot be inserted into the paper feed slot
Cause
The roll paper is warped.
Paper is jammed by the paper feed slot.
The paper source selection is incorrect.

Cannot load sheets

Cannot load sheets
Cause
The paper source selection is incorrect.

Paper is not cut neatly

Paper is not cut neatly
The paper is bent or curled at the cut posi-
tion.
Paper rises by the ends of the cut position
before it is cut.
You are using paper that cannot be cut with
the Cutter Unit.
92
Straighten out curls and reload the roll.
Remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
Press the Load button and select the paper source.
Press the Load button and select the paper source.
Cause
Straighten out any curling by the edges of the paper.
Reload the paper correctly.
Specify Manual in Cutting Mode in the Control Panel menu and use scissors or a
cutting tool to cut the roll after printing.
(See "Specifying the Cutting Method for Rolls.")
Corrective Action
P.84
➔
P.87
➔
Corrective Action
Corrective Action
iPF685 Series
User's Guide
➔
Basic Guide