Table of Contents
Advertisement
Cannot adjust printhead.
Messages regarding printheads
Messages regarding printheads
Cannot adjust printhead. ........................................................................................................................................... 124
Wrong printhead. .......................................................................................................................................................... 124
Printhead error .............................................................................................................................................................. 124
Cannot recognize print head. .................................................................................................................................. 124
Execute printhead cleaning. ..................................................................................................................................... 125
Cannot adjust printhead.
Cannot adjust printhead.
Cause
The Printhead nozzles are
clogged.
The Printhead cannot be
aligned; highly transparent film
is loaded.
The Printhead is installed
crooked.
Wrong printhead.
Wrong printhead.
An incompatible Printhead has been installed.
Printhead error
Printhead error
Cause
There is a problem with the Printhead.
Cannot recognize print head.
Cannot recognize print head.
No Printhead is installed.
The Printhead cannot be recognized because it is not installed correctly.
124
Execute Head Posi. Adj. again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
3.
Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
4.
Execute Head Posi. Adj. again.
(See "Automatic Adjustment to Straighten Lines and Colors.")
Press the OK button to clear the error.
We recommend using a type of paper that you often use, other than film, for Printhead adjustment.
(See "Automatic Adjustment to Straighten Lines and Colors.")
Straighten the Printhead as follows, and then execute Head Posi. Adj. again.
1.
Press the OK button to clear the error.
2.
Use Head Inc. Adj. to adjust the angle of inclination of the Printhead.
(See "Adjusting Line Misalignment.")
3.
Execute Head Posi. Adj. again.
(See "Automatic Adjustment to Straighten Lines and Colors.")
Cause
Open the Top Cover and replace the Printhead with a new one.
Open the Top Cover and replace the Printhead with a new one.
(See "Replacing the Printhead.")
Cause
Corrective Action
User's Guide
➔
P.43
➔
User's Guide
➔
Corrective Action
(See "Replacing the Printhead.")
Corrective Action
P.30
➔
Follow these steps to install the Printhead.
1.
Open the Top Cover.
2.
Install the Printhead.
(See "Replacing the Printhead.")
Follow these steps to reinstall the Printhead.
1.
Open the Top Cover.
P.79
➔
P.79
➔
P.79
➔
P.30
➔
Corrective Action
➔
iPF685 Series
P.30
Basic Guide
Advertisement
Chapters
Table of Contents
