Microphone Failure
If internal or external Microphones fail, perform the following:
1. Check that the microphone is enabled. Navigate to
Hardware and Sound
2. Right click on the Recording tab and select Show Disabled Devices (clear by
default). The microphone appears on the Recording tab.
3. Right click on the microphone and select
4. Select the microphone then click
5. Increase the volume to the maximum setting and click
6. Test the microphone hardware:
7. If the Issue is still not resolved, refer to
Troubleshooting
Downloaded from
www.Manualslib.com
Figure 4-7. Microphone Failure
→
Sound
Select the microphone and click
Set up microphone
Select
Select the microphone type from the list and click
Follow the on-screen prompts to complete the test.
manuals search engine
0
Start
and select the Recording tab.
Enable
.
Properties
. Select the
Configure
.
.
Online Support Information
→
→
Control Panel
Levels
tab.
OK
.
Next
.
.
4-13