Thermal Module Installation - Acer Aspire One D270 Service Manual

Thermal Module Installation

+
IMPORTANT:
CAUTION:
!
The following thermal grease types are approved for use:



The following thermal pads are approved for use:

1. Remove all traces of thermal grease from CPU using a lint-free cloth or cotton swab
and Isopropyl Alcohol, Acetone, or other approved cleaning agent.
2. Apply small amount of thermal grease to center of CPU.
NOTE:
3. Place the thermal module on the mainboard. Refre to
4. Install and secure two (2) screws (C) to the mainboard in numerical order from one (1)
to two (2). Refer to
5. Connect thermal module cable (A) to mainboard connector (B). Refer to
6. Install mainboard.
ID
C
Machine Maintenance Procedures
Downloaded from www.Manualslib.com
Apply approved thermal grease and ensure all heat pads are in position
before replacing module.
Use caution when applying thermal grease. Thermal grease may cause
damage to the mainboard.
Silmore GP50
Honeywell
Jet Motor 7762
Eapus XR-PE
NOTE:
Force used during installation of thermal module is sufficient to spread grease
evenly over CPU top.
Figure
Size
M2.0*3.0 NI
manuals search engine
3-25.
Quantity
2
Figure 3-26.
Figure
Screw Type
0
3-25.
3-27