DIMM (Dual In-line Memory Module) Removal
Prerequisite:
1. Find the DIMM (D). Refer to
2. Push DIMM clips (A) outwards
3. Disconnect the DIMM from the mainboard connector (B). Refer to
DIMM Installation
1. Connect the DIMM to the mainboard connector (B). Refer to
2. Push down on the DIMM until the module clips (A) lock into position. Refer to
Figure
3. Install the base cover.
Machine Maintenance Procedures
Downloaded from
www.Manualslib.com
Base Cover Removal
A
Figure 3-16. DIMM Removal
3-16.
manuals search engine
Figure
3-10.
(Figure
3-16).
B
A
Figure
3-16.
Figure
3-16.
3-19
0
0