Bluetooth Module Removal
Prerequisite:
1. Find the Bluetooth Module (A) on the lower case
2. Disconnect the Bluetooth cable (B) from the mainboard connector (C).
3. Remove the Bluetooth Module (A) from the lower case.
Bluetooth Module Installation
1. Place the Bluetooth Module (A) on the lower case. Refer to
2. Connect the Bluetooth cable (B) to the mainboard connector (C)
3. Install the upper case.
3-22
Downloaded from
www.Manualslib.com
Upper Case Removal
Figure 3-20. Bluetooth Module
manuals search engine
(Figure
C
B
A
Machine Maintenance Procedures
3-20).
Figure
3-20.
(Figure
3-20).
0
0