3G Module Removal
Prerequisite:
1. Find the 3G module (B). Refer to
2. Disconnect main (A) and auxiliary (B) antenna cables from module
3. Remove one (1) screw (C) from the mainboard. Refer to
4. Remove the 3G module from the mainboard connector (D). Refer to
3G Module Installation
1. Place the 3G module into the mainboard connector (D). Refer to
2. Install and secure one (1) screw (C) to mainboard. Refer to
3. Install the main (A) and auxiliary (B) antenna cables on 3G module. Refer to
Figure
4. Install the base cover.
ID
C
Machine Maintenance Procedures
Downloaded from
www.Manualslib.com
Base Cover Removal
D
Figure 3-14. 3G Module
3-14.
Size
M2.0*3.0 NI
manuals search engine
Figure
3-10.
C
B
A
Figure
Quantity
1
(Figure
3-14).
3-14.
Figure
3-14.
Figure
3-14.
Figure
3-14.
Screw Type
3-17
0
0