Table of Contents
Advertisement
Bluetooth Module Removal
Prerequisite:
Upper Cover Removal
1. Locate Bluetooth module (B) on upper cover.
2. Disconnect module cable (D) from mainboard connector (C). (Figure 3-24)
Figure 3-24. Bluetooth Module with Cable
3. Lift module from adhesive strip on upper cover.
4. Disconnect module cable (D) from module connector (E).
Bluetooth Module Installation
1. Connect module cable (D) to module connector (E). (Figure 3-24)
2. Install and secure module to adhesive strip on upper cover.
3. Connect module cable (D) to mainboard connector (C).
4. Install upper cover.
Machine Maintenance Procedures
C
D
(Figure
3-22)
E
0
0
3-27
Advertisement
Table of Contents
