Replacing Memory Module - Dell 500 Owner's Manual

Replacing Memory Module

NOTICE:
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
1 Align the notch in the module edge connector with the tab in the
connector slot.
2 Slide the module firmly into the slot at a 45-degree angle, and rotate the
module down until it clicks into place. If you do not feel the click, remove
the module and reinstall it.
NOTE:
No error message indicates this failure.
118
Downloaded from www.Manualslib.com
1
1 securing clips (2)
To avoid electrostatic discharge, ground yourself by using a wrist
If the memory module is not installed properly, the computer may not boot.
Adding and Replacing Parts
manuals search engine
2
2 memory module