Dell 500 Owner's Manual page 33

To transfer data to the new computer:
1 On the Now go to your old computer screen on the new computer, click Next.
2 On the Where are the files and settings? screen, select the method you
3 Click Finished and restart the new computer.
Running the Files and Settings Transfer Wizard Without the Operating System Media
To run the Files and Settings Transfer Wizard without the Operating System
media, you must create a wizard disk that will allow you to create a backup
image file to removable media.
To create a wizard disk, use your new computer with Windows XP and
perform the following steps:
1 Open the Files and Settings Transfer Wizard: click Start→ All Programs→
2 When the Files and Settings Transfer Wizard welcome screen appears,
3 On the Which computer is this? screen, click New Computer→ Next.
4 On the Do you have a Windows XP CD? screen, click I want to create a
5 Insert the removable media, such as a writable CD, and click OK.
6 When the disk creation completes and the Now go to your old
7 Go to the old computer.
To copy data from the old computer:
1 On the old computer, insert the wizard disk.
2 Click Start→ Run.
3 In the Open field on the Run window, browse to the path for fastwiz (on
Downloaded from www.Manualslib.com
chose for transferring your settings and files and click Next.
The wizard reads the collected files and settings and applies them to your
new computer.
When all of the settings and files have been applied, the Finished screen
appears.
Accessories→ System Tools→ Files and Settings Transfer Wizard.
click Next.
Wizard Disk in the following drive→ Next.
computer message appears, do not click Next.
the appropriate removable media) and click OK.
manuals search engine
Setting Up Your Computer
33