Changing The Oven Light - AEG BE6915001M User Manual

3172742-002 In-Fr. (AEG) 17/10/14 09:50 Página 21
Instructions to remove / replace inside
glass panels. 90 cm oven
1 Open the oven door.
2 Fully rotate the two clamps (N) to stop
the door from closing.
3 Squeeze point 1 located on the upper
part of both sides of the oven door.
4 Continue squeezing point 1 and pull
out the upper clasp of the door.
N
1
1
5 The inside glass panels will now be
loose and can be easily cleaned with
window cleaning liquid and a soft
cloth.
WARNING
If the door has not been blocked
with the clamp (N), please take care
when removing the inside glass
panels as the oven door will close.
6 Once clean, return the glass panels in
the same order so that the word
TERMOGLASS can be read.
7 Replace the upper clasp of the door,
making sure that the side tabs fit in
point 1.

9.5 Changing the Oven Light

bulb
CAUTION
First make sure the oven is
unplugged before proceeding to
change the bulb.
WARNING
Ensure that the appliance is
switched off before replacing the
lamp to avoid the possibility of
electric shock.
The replacement bulb must be resistant
to temperatures up to 300ºC. You can
order one from the Technical Assistance
Service.
• Loosen the lens from the lampholder
with the help of the appropriate tool.
ENGLISH 21