Manual Adjustment (2); Automatic Adjustment - Sony DVP-M35 Service Manual

5-4-6. Manual Adjustment (2)

Manual Adjust 2
SA.042A0B SI.00 EMG.00
0.Jitter on
1.Focus Offset
2.Tilt Offset
3.L.F. Offset
0
20
pppppppp
..........................
DVD SL 12cm
The manual adjustments in which jitter measurement is performed, can be executed using this display. When a number is selected from 1 or
2 or 3, present setting of the selected item is shown. The adjustment value can be increased or decreased using the arrow mark keys
(↑→↓←). When jitter value is displayed, display of the jitter meter swings. The adjustment value is stored in EEPROM.
0. Jitter The jitter measurement can be turned on or off. The jitter measurement is possible only when CLV disc is loaded.
1. Focus Offset The focus offset adjustment can be performed.
2. Tilt Offset The tilt offset adjustment can be performed.
3. L. F. Offset The electrical offset within ARP can be performed.

5-4-7. Automatic Adjustment

Auto Adjust
SA.05BCA7 SI.00 EMG.00
0. Auto TRX. Offset
1. Auto Tilt Offset
2. Auto Focus Offset
3. Auto Focus Gain
4. Auto TRX. Gain
5. Auto EQ
6. Auto L.F. Offset
7. Memorize Pullin
DVD SL 12cm
The respective adjustment items can be adjusted automatically from this display. However, be careful when performing the automatic
adjustment because there are several limitations in it.
0. Auto TRK. Offset It performs the automatic adjustment of Tracking Offset. The adjustment value is stored in EEPROM. Perform this
adjustment with the player in-Focus and and with Tracking Off. Because pickup moves toward outer circumference
in this adjustment, do not perform this adjustment in outer circumference. In the case of CD adjustment, the simple
AGC adjustment of tracking is also performed in this adjustment.
1. Auto Tilt Offset It performs the automatic adjsutment of Tilt Offset. The adjustment value is stored in EEPROM. Perform this
adjustment when CLV is locked in. If this adjustment cannot be performed, adjust the Focus Offset and tangential
skew adjustment first then perform this adjustment.
2. Auto Focus Offset It performs the automatic adjsutment of Focus Offset. The adjustment value is stored in EEPROM. Perform this
adjustment when CLV is locked in. If this adjustment cannot be performed, adjust the Tilt Offset and tangential
skew adjustment first then perform this adjustment.
3. Auto Focus Gain It performs the automatic adjsutment of Focus Gain. The adjustment value is stored in EEPROM. Perform this
adjustment when CLV is locked in. If this adjustment cannot be performed, the player could be faulty.
4. Auto TRK. Gain It performs the automatic adjsutment of Tracking Gain. The adjustment value is stored in EEPROM. It is
recommended to perform this adjustment when CLV is locked in. If this adjustment cannot be performed, the
player could be faulty.
40
60
23
5-25