Related Manuals for Sony DVP-M50
Summary of Contents for Sony DVP-M50
- Page 1 DSS7031EM_UK_OM_SONY_ENG 9-885-046-95(2) CD/DVD Player DVP-M50 © 2003 Sony Corporation...
-
Page 2: Safety Precautions
Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. Precautions Safety • This unit operates on 110 – 240 V AC, 50/60 Hz. Check that the unit’s operating voltage is identi-... -
Page 3: Safety Precautions
Plasma Display Panel tele- visions and projection televisions are susceptible to this. If you have any questions or problems concerning your player, please consult your nearest Sony dealer. -
Page 4: Table Of Contents
Table of Contents Introduction Safety Precautions ......2-3 Table of Contents ......4 Before Use . -
Page 5: Before Use
Video CDs. Some DVDs made for business pur- poses may not be played on the unit. Regional code of the DVD player and DVDs This DVD player is designed and manufactured for playback of region “2” encoded DVD soft- ware. -
Page 6: Precautions
To obtain a clear picture The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. -
Page 7: Front Panel And Display Window
Front Panel and Display Window @ @ / 1 Switches the player ON and OFF. Go to beginning of current chapter/track or to PREVIOUS chapter/track. ANGLE active DVD inserted CD Audio CD inserted VCD Video CD inserted MP3 MP3 disc inserted Indicates current player function: Playback, Pause, etc. -
Page 8: Remote Control
Remote Control Operation Point the remote control at the remote sensor and press the buttons. @ @ / 1 (on/standby) Switches DVD Player ON and OFF. 2 (Volume) +/– buttons Adjusts the Volume of the TV. t (TV/video) Switches the TV’s input source between the TV and other input sources. -
Page 9: Rear Panel
Rear Panel COAXIAL (Digital audio out jack) Connect to digital (coaxial) audio equipment. AUDIO OUT (Left/Right) Connect to an amplifier, receiver, or stereo system. VIDEO OUT Connect to a TV with video inputs. DIGITAL OUT LINE OUT PCM/DTS/MPEG/ DOLBY DIGITAL COAXIAL R AUDIO VIDEO... -
Page 10: Connections
DVD Player to the audio left/right in jacks on the TV (A) using the audio cables (not supplied). SCART connection Connect the TO TV scart jack on the DVD Player to the corresponding in jacks on the TV using the scart cable (T) (not supplied). -
Page 11: Connecting To Optional Equipment
Dolby Pro Logic ll/ Pro Logic Connect the Left and Right AUDIO OUT jacks on the DVD Player to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audio cables (A) (not supplied). -
Page 12: Before Operation
Before Operation General Explanation This manual gives basic instructions for operating the DVD Player. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indi- cating that the operation is not permitted by the DVD Player or is not available on the disc. -
Page 13: Initial Settings
Before Operation (Continued) Initial Settings You can set your own Personal Preferences on the player. Initial Settings General Operation Original Disc Audio English Disc Subtitle French Disc Menu German Rating Spanish Area Code Italian TV Aspect Chinese Menu Language Polish Progressive Scan Hungarian Digital Audio Output... -
Page 14: Sound
Set the player’s Digital Audio Output according to the type of audio system you use. DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM” if you connected the DVD Player’s DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equip- ment with a Dolby Digital decoder). -
Page 15: Parental Control
Before Operation (Continued) Parental Control Rating Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. -
Page 16: Operation With Dvd And Video Cd
DVD player. Audio system: Turn on the audio system and select the input source connected to the DVD player. Press Z Z (OPEN/CLOSE) to open the disc tray. Load your chosen disc in the tray, with the playback side down. -
Page 17: Still Picture
Operation with DVD and Video CD (Continued) General Features (continued) Still Picture 1 Press X (PAUSE) during playback. The player will now go into PAUSE mode. 2 To exit still motion mode, press X (PAUSE) again or H (PLAY). Slow Motion 1 Press t or T during playback. -
Page 18: Special Dvd Features
Operation with DVD and Video CD (Continued) Special DVD Features Checking the contents of DVD Video discs: Menus DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Then, press the appropriate number button to select an option. Or, use the B/b/V/v buttons to highlight your selection, then press ENTER. -
Page 19: Operation With Audio Cd And Mp3 Disc
Operation with Audio CD and MP3 Disc Playing an Audio CD and MP3 Disc The DVD Player can play MP3 formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3 recordings, read the notes on MP3 Recordings on right. -
Page 20: Pause
Operation with Audio and MP3 Disc (Continued) Pause 1 Press X (PAUSE) during playback. 2 To return to playback, press H (PLAY) or press X (PAUSE) again. Moving to another Track Press . or > briefly during playback to go to the next track or to return to the beginning of the current track. -
Page 21: Operation With Jpeg Disc
Notes on JPEG Recordings Depending upon the size and number of the JPEG files, it could take a long time for the DVD player to read the disc’s contents. If you don’t see an on- screen display after several minutes, some of the files are too big —... -
Page 22: Programmed Playback
Programmed Playback Programmed Playback with Audio CD and MP3 Disc The Program function enables you to store your favorite tracks from any disc in the player memory. Program can contain 30 tracks. Press PROGRAM during playback or in the stop mode to enter the Program Edit mode. -
Page 23: Additional Information
Controlling other TVs with the remote You can control the sound level, input source, and power switch of non-Sony TVs as well. If your TV is list- ed in the table below, set the appropriate manufacturer code. 1. While holding down TV @ / 1, press the number buttons to select the manufacturer code for your TV (see the table below). -
Page 24: Troubleshooting
The disc is dirty. The Rating level is set. The remote control The remote control is not pointed at the remote sensor of the DVD player. does not work properly. The remote control is too far from the DVD player. -
Page 25: Language Code List
Language Code List Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 13). Code Language Code 6566 Abkhazian 7074 6565 Afar 7073 6570 Afrikaans 7082 8381 Albanian 7089 6577 Ameharic 7176 6582 Arabic 7565... -
Page 26: Area Code List
Area Code List Enter the appropriate code number for the initial setting “Area Code” (See page 15). Code Area Code Area Andorra Eritrea United Arab Emirates Spain Afghanistan Ethiopia Antigua and Barbuda Finland Anguilla Fiji Albania Falkland Islands Armenia Micronesia Netherlands Antilles Faroe Islands Angola... -
Page 27: Specifications
Specifications General Power requirements Power consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity System Laser Signal system Frequency response Signal-to-noise ratio Harmonic distortion Dynamic range Outputs VIDEO OUT S-VIDEO OUT Audio output (digital audio) Audio output (optical audio) Audio output (analog audio) Accessory Remote control . - Page 28 Sony Corporation http://www.sony.net/...