Cleaning & Maintenance; Cleaning External Parts; Cleaning The Pack Holder Assembly; Indicators - Keurig K-Cup K145 Owner's Manual

SECTION 2 Menu Controls & Indicators

Indicators

1. AUTO-OFF Light: When the green light is
9
fig.
illuminated it means the AUTO-OFF time is
enabled. When the light is no longer illuminated,
the Auto-Off feature is off.
ADD WATER
POWER Light: When the green light is
2.
DESCALE
illuminated, it means your brewer is on.
HEATING
DRAIN BREWER
HEATING Light: When the red light is illuminated,
3.
AUTO-OFF
it means the water for your brew is being heated.
POWER
BREW
When the light is no longer illuminated, your
brewer will be ready to brew your beverage.
DESCALE Light: When the amber light is
4.
illuminated, it means that the scale buildup in
your brewer is interfering with its performance.
When this happens please descale your brewer.
If the amber light is blinking, it means that the
scale build up is significant enough to damage
the brewer. In such cases, descale the brewer
immediately. Refer to page 12 for instructions.
ADD WATER Light: If the blue light is illuminated,
5.
it means the water level in the Water Reservoir
is either low or the Water Reservoir has been
removed. Refer to page 8 for instructions.
SECTION 3

cleaning external Parts

Regular cleaning of the brewer's external components is recommended.
Never immerse the brewer in water or other liquids. The external
1.
components may be cleaned with a damp, soapy, lint free, non-abrasive cloth.
The Drip Tray can accumulate up to 10 oz. of overflow. The Drip Tray and
2.
Drip Tray Plate should be periodically inspected and rinsed clean. To
remove the Drip Tray Assembly, simply slide it toward you, keeping it level
at all times to avoid spilling. The Drip Tray and Drip Tray Plate should not
be placed in the dishwasher. They should be cleaned with a damp, soapy,
lint free, non-abrasive cloth and rinsed thoroughly.
cleaning the K-cup
®
1. Cleaning the Parts
10
fig.
Assembly can be placed onto the top shelf of a
dishwasher.
the dishwasher.
the Handle and grasp the top of the K-Cup
Holder with one hand while pushing up on the
bottom of the K-Cup
underneath with the other until it releases
(fig. 10). After cleaning, align the K-Cup
Holder with the opening using the two front ribs
as a guide and snap into place from the top.
10
Cleaning & Maintenance
Pack holder assembly
— The K-Cup Pack Holder
®
NOTE: Use low temperature cycles in
To remove from the brewer, lift
Pack Holder from
®
Pack
®
Pack
®