Canon IRC3580 Operation Manual page 7

Cleaning Display for the Original Scanning Area
Enables you to set the machine to display a message prompting you to clean the original scanning
area for the feeder, when dirt has been detected.
Data Compression Ratio for Remote Scans
Enables you to set the compression ratio for remote scanning.
Gamma Value for Remote Scans
(7/8)
Enables you to set the gamma value that is used for scanning colour documents into your computer
through the Network Scan function.
Limited Functions Mode
Enables you to temporally limit the use of the finishing mode, if a problem frequently occurs when
using the finisher mode.
Erase Remaining Toner Error Message
Enables you to erase the Remaining Toner Error Message screen which is displayed when the
remaining toner is low if Display Remaining Toner Error Message in System Settings (from the
Additional Functions screen is set to 'On'.
*1 Displayed only if an optional finisher is attached.
*2 Displayed only if the optional Feeder (DADF-L1) is attached.
*3 Displayed only if the optional Feeder (DADF-L1) or Platen Cover Type-H is attached, and the
printer function (standard-equipped for the iR C3580i/iR C3080i/iR C2380i) is available for
use.
Shutdown Mode
Enables you to set the machine to cancel jobs in progress and restrict further access to the hard
disk when you turn the machine OFF with the main power switch.
Initialize Common Settings
Enables you to restore all of the Common Settings to their defaults (initial settings).
(8/8)
Additional Functions
6