Download  Print this page

Names Of Parts; How To Use The Unit; Check The Maintenance Switch Is Off; After Washing Hands - Mitsubishi Electric Jet Towel JT-SB116JH-G-NA Instruction Manual

Hand dryer
Hide thumbs
   

Advertisement

■ Names of Parts

※ Shaded areas in the fi gure indicate antibacterial material.
Service panel
* Before cleaning the unit, turn the maintenance switch on.
The blower does not turn on while cleaning.
Service panel
Side cover

■ Check the maintenance switch is off

How to open
Service panel

■ After washing hands

1
Wet hands
Automatic Stop Function
The power lamp fl ashes and the dryer stops automatically if the unit is used continually for more than 30 seconds.
To continue using the hand dryer, remove your hands, and then re-insert them.
Simple heater
Softens the feeling of cold air.
If the room temperature is above 80ºF (30ºC), the heater will stop working to prevent the temperature from rising too high.
NOTE
If the room temperature is less than 64ºF (18ºC), the air may feel cold.

■ If not using for a long period

Then turn the breaker off.
Maintenance switch*
Front panel
Display
Power
Power lamp

How to use the unit

Open the service
panel.
* Before cleaning the unit, turn the maintenance switch on.
The blower does not turn on while cleaning.
2
Insert hands from the side
Hand drying area
Main unit
Black wall area
The blue light does not have a sterilizing
effect.
Do not look directly into the blue light.
Heater
Heater lamp
Check the maintenance
switch off.
Maintenance switch*
OFF
3
Bring hands upwards
※ Repeat 2-3 times
− 3 −
Blue light
Sensor
Drain tank
Air fi lter
NOTE
Do not turn the maintenance
switch off while hands or
other objects are inside the
hand drying area.
The lamp does not light up
even when the maintenance
switch turned off. (see page 7)
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jet towel jt-sb116jh-w-na