System Board - HP EliteBook Folio 1040 G2 Maintenance And Service Manual

Reverse this procedure to install the heat sink/fan assembly.

System board

NOTE: The system board spare part kit includes replacement thermal material.
All system boards use the following part numbers:
xxxxxx-001: Windows 7 or non-Windows operating systems
xxxxxx-501: Windows 8.1 Standard operating system
xxxxxx-601: Windows 8.1 or Windows 10 operating system
Description
Intel Core i7-5650U processor (2.20 GHz, 4-MB cache)
Intel Core i7-5600U processor (2.60 GHz, 4-MB cache)
Intel Core i7-5500U processor (2.60 GHz, 4-MB cache)
Intel Core i5-5300U processor (2.30 GHz, 3-MB cache)
Intel Core i5-5200U processor (2.20 GHz, 3-MB cache)
Before removing the system board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the keyboard (see
6. Remove the heat sink/fan assembly (see
7. Remove the battery (see
NOTE: When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
● SSD drive module (see
● Memory module (see
● WWAN module (see
● WLAN module (see
● Heat sink (see
Remove the system board:
1. Disconnect the following cables:
● (1): Power connector
● (2): Speaker
Bottom cover on page
Keyboard on page
Battery on page
SSD drive on page
Memory module on page
WWAN module on page
WLAN module on page
Heat sink/fan assembly on page
31)
46)
Heat sink/fan assembly on page
36).
38)
40)
42)
44)
55)
Component replacement procedures
Spare part number
806993-xxx
798520-xxx
831096-xxx
798519-xxx
798518-xxx
55)
57