Power Control
Auto Power On
PC module power
Max. Power Saving
Standby Control
Power Button
Power on only
Network Standby
- The displayed image may differ depending on the model.
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
Off
Auto
•
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message
On
Off
•
The message
Auto
― The
― The DBE and DM32E models do not support
― If
Off
― If
On
•
Power-saving mode will activate if no input signals are detected.
Power Button
The power button can be set to either turn on the power or turn on/off the power.
Power on
•
Power on and
•
Network Standby
This feature keeps the network power on when the product turns off.
Off
•
No Signal
will appear if no source device is connected.
No Signal
will appear if no input signals are detected.
Standby Control
option is only enabled when
No Signal
is displayed although a source device is connected, check the cable connection.
No Signal Message
is set to Off, the
No Signal
No Signal Message
to On.
If this is the case, set
only: Set the power button to turn on the power.
off: Set the power button to turn on/off the power.
/
On
Source
is set to PC, DVI,
HDMI
or DisplayPort.
DisplayPort
mode.
message does not appear.
136