Samsung DB32E User Manual page 182

Hide thumbs Also See for DB32E:
Table of Contents

Advertisement

Power Supply
Environmental
Operating
considerations
Storage
― Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor
settings.
Monitor installation takes place automatically. However, you can customize the installation settings if desired.
― Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does not affect
product performance.
― This device is a Class A digital apparatus.
[Recommendation] - EU Only
• Hereby, Samsung Electronics, declares that this Monitor is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
• The official Declaration of Conformity may be found at http://www.samsung.com/displaysolutions, go to Support >
Search Product Support and enter the model name.
• This equipment may only be used indoors.
• This equipment may be operated in all EU countries.
AC 100 to 240 VAC (+/- 10%), 60 / 50 Hz ± 3 Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Temperature : 32 F – 104 F (0 C – 40 C), With PIM : 50 F – 104 F (10 C – 40 C)
Humidity : 10 % – 80 %, non-condensing
Temperature : -4 F – 113 F (-20 C – 45 C)
Humidity : 5 % – 95 %, non-condensing
182

Advertisement

Table of Contents
loading

Table of Contents