Turning The Power On And Off - Roland HP 535 Owner's Manual

Before You Play

Turning the Power On and Off

Be sure to follow the procedure below when turning
on and off the power. Failure to follow these steps in
the order given may result in malfunction, and/or
damage to speakers or other equipment.
Turning On the Power
1.
Before switching the power on, turn the
volume all the way down (using the
slider to the left).
Volume
Min Max
2.
Connect the power cord that came with
your HP 535/335 to the AC Inlet socket
on the bottom of the unit.
3.
Plug the other end of the power cord
into a wall outlet.
MIDI
Out In Pedal Input Output
R L(Mono) R L(Mono)
Stereo Stereo
4.
Press the [Power] switch.
Several seconds after the power is turned on, the
keyboard will produce sound when played.
ON
MEMO
This unit is equipped with a protection circuit. A brief
interval (a few seconds) after power up is required before the
unit will operate normally.
Use only the power cord that is provided with your HP
535/335.
14
Turning Off the Power
1.
Before switching the power off, turn the
volume all the way down (using the
slider to the left).
2.
Press the [Power] switch.
The power is turned off.
OFF