Installation and commissioning
8
Fitting the upper V-belt guard
.01.04
8
Fitting the bottom v-belt guard
.01.05
8 - 3
4
3
4
5
Fig. 8 - 04
Fig. 8 - 05
● Screw position stop 1 to the right belt
6
guard section 2.
● Attach belt guard section 3 with screws 4.
● Push the slots of the right belt guard
section 2 behind the heads of retaining
2
screws 6 and attach it with screws 5
and 6.
1
6
● Position v-belt guard 1 in such a way that
motor pulley and v-belt can run freely.
1
Fig. 8 - 05 shows a Quick
motor. If a different motor is
used, the instruction manual of
the motor must be complied
with.