Commissioning; Switching The Machine On/Off - Pfaff 1525 Instruction Manual

Installation and commissioning
8

Commissioning

.03
● Check the machine, particularly its electrical wiring and pneumatic tube connections, for
● Clean the machine thoroughly and afterwards fill with oil and oil the machine (see Chap-
● Have a mechanic check whether the motor of the machine can be used with the avail-
● When the machine is running, the balance wheel must turn towards the operator. If it
● Connect the machine to the compressed air supply. When it is connected, the gauge
● Before commissioning the machine, remove grommet 1 of oil container 2.
8

Switching the machine on/off

.04
● Switch the machine on (see Chapter 7.01, On/off switch).
● Carry out a running test.
8 - 7
any damage.
ter 10, Care and maintenance).
able power supply and that the motor is correctly connected in the junction box.
Do not operate the machine if there is any discrepancy.
does not, have the motor connection changed by a mechanic.
should indicate a pressure of approx. 6 bar. If necessary have this reading correctly set
(see Chapter 10.03, Checking/adjusting the air pressure).
2
Fig. 8 - 08
1
Grommet 1 is only needed for
support during transportation
and must not be used while the
machine is in operation.